Follow the OpenVMS VAX Version 7.3 Upgrade and Installation Manual AA–QSBQD–TE http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04623149&lang=en-us&cc=us <http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04623149&lang=en-us&cc=us>
Section 3 takes you through the basics on how create a new disk. I used the same procedure just last week. Good Luck. > On Aug 7, 2015, at 10:26 AM, Holm Tiffe <[email protected]> wrote: > > Hi, > > I've got an VAX4000/300 eqipped with an TK70, 2x RF31, 1xRF71 disks, > and an CQD-200/TM. > I've connected an toshiba Xm5701 drive to the SCSI Bus and the machine sses > it as DUA3. I have a VMS7.3 CDROM and want to install it on one of the > disks. > I've read some documents on HPs website but it isn't clear to me > how to boot the cdrom correctly, there is root 1 mentioned. > What bootflag must entered, B/R5:10000000? > ..in the case w/o the R5:10000000 I get a $ Promt finally (here I habe to > read further). With the bootflag the System is complaining that dua3 is > write protected (it is the cdrom)... > > What's the correct way to install VMS on that machine? > > Regards, > > Holm > -- > Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, > Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583 > www.tsht.de, [email protected], Fax +49 3731 74200, Mobil: 0172 8790 741 >
