I might have prints for the rk11, and RK11 and RF11 on fische, when I can find them
On Tue, Oct 13, 2015 at 1:48 PM, Noel Chiappa <[email protected]> wrote: > > From: Henk Gooijen > > > I will probably download everything ... in my experience, websites > > with "/~xxxx/" in it seem to disappear after "some" time :-/ > > True, but pages maintained by institutions are almost equally bad about > staying put! Many's the time I've clicked on a link, and the target's > gone... > > I make a real effort to try and not not kill any URL to my Web site that > ever > worked (via redirects, if needed). I wish institutions were the same, but > alas, for most Web-masters, they apparently seem not to give a rodent's > posterior. > > But the downloading is a good idea - the more copies, the better (although > in > this particular case, it's not like the content is irreplacable). > > > > I have probably all PDP-11 models (except the PDP-11/50) > > ... > > I am not going to disassemble just for a scan. > > Well, the /45 front panel is easy: take out the 4 screws holding the bezel > on > (quite easy - unlike, say, removing an H7420 to clean it - something I am > probably going to have to do), and then take out the 3 counter-sunk screws > holding the panel on (ditto), remove the two knobs (ditto again) - done! > And > equally easy to reverse the process. > > > I could take pictures, but as you say, edges will warp a little. > > We've already got pretty good pictures of the 11/45 panel, and the RP11-C. > There are no RF11 or RK11-C images (that I know of - the RF11 manual only > has > a drawing, and the RK11-C manual, not even that), so if you have either of > those, a picture would be better than nothing. > > Noel >
