> -----Original Message----- > From: cctalk [mailto:[email protected]] On Behalf Of Charles > Anthony > Sent: 20 December 2015 23:20 > To: General Discussion: On-Topic and Off-Topic Posts > <[email protected]> > Subject: Re: EAI TR-10 Patch Plugs > > On Sun, Dec 20, 2015 at 2:55 PM, Charles Anthony > <[email protected] > > wrote: > > > > > > > On Sun, Dec 20, 2015 at 2:43 PM, Dave Wade <[email protected]> > wrote: > > > >> > >> > >> > -----Original Message----- > >> > From: cctalk [mailto:[email protected]] On Behalf Of > >> > [email protected] > >> > Sent: 20 December 2015 22:23 > >> > To: General Discussion: On-Topic and Off-Topic Posts > >> > <[email protected]> > >> > Subject: RE: EAI TR-10 Patch Plugs > >> > >> If I cut them with a saw I end up with a gap. SuperGlue does not gap > >> fill. I am kind of leaning towards casting resin.... > >> > >> Sacrifice one: Cut the first one, and then cut a second one lower > >> down so > > that the top on the second one is the correct length to glue onto the first. > > > > > Or, rather then cutting it, remove the inside threads on the shell, and glue > it > back on to the plug, rather than screwing it on.
That’s about the best method, but there is not much room for extra lead to push back into the plug... I really wonder how these were made originally they look so neat... > > -- Charles
