> -----Original Message----- > From: cctalk [mailto:[email protected]] On Behalf Of Fred Cisin > Sent: 25 March 2016 19:10 > To: General Discussion: On-Topic and Off-Topic Posts > <[email protected]> > Subject: RE: Olivetti M24 Mounting Bushes for Bus Converter > > > I looked up rivnuts and they certainly look similar. They are > > definitely not standoffs though. I shall look closer at rivnuts. > > also look at nutserts. > > Riv-nuts are pop-rivets with a threaded center. Usable through sheet metal, > and into blind holes (very carefully) Nutserts call for drilling and threading a > hole and screwing them in. > > I'm assuming that you are talking about threaded inserts in a plastic piece? >
I have posted the pictures here: https://onedrive.live.com/redir?resid=FC758A5A91B91301!5776&authkey=!AOs6cfg 8p_qyB5Q&ithint=folder%2cjpg The pictures show three things: 1. The square holes that the mountings go into. 2. The top and bottom side of the steel mountings. 3. The top and bottom sides of the nylon (?) mountings. I find myself to really need the steel mountings to be able to mount the bus converter, I am hopeful that I can move a couple of existing nylon ones. Regards Rob
