On 03/30/2016 10:51 AM, William Donzelli wrote:
Somebody mentioned a house with a collapsed floor. A friend of mine bought
two 770/145s and a GE/Intersil memory box. (I bought the other memory box,
in 1979 or so, a **MEG** of memory was a big deal!)
I assume you mean 370/145s/
Yes.
Whatever happened to them? In 1979, they
would have been still usable machines.
Well, the problem with the 370's were peripherals and power.
Although the lower level 370's had integrated channels, you
still needed control units and drives. To do any real work,
you'd need at least a DASD controller and drives and a com
controller. Probably at least a tape controller and one
drive to do backups and load software. That won't fit in
the bedroom of a 2-bedroom house, which was where this thing
was!
Second was the 370s used a motor alternator set to convert
50/60 Hz power to 415 Hz power. To keep compatibility, they
used the same size MG set for a range of machines. So, the
145 had a 17 KVA output alternator with a 20 Hp 208V 3-phase
motor. We tried to build a phase converter to run the motor
off the guy's 60 A 240 V service, but the reactive current
was over 60 A and would blow the main breaker. The main
logic supply for the /145 was 390 A at +1.3 and -3 V, so
about 1.5 KW. We should have just got a bunch of big 5V
switcher supplies and tuned them down to the appropriate
voltage. But, that would have likely cost more than he paid
for the machines, maybe even surplus.
The 145 was not a real high performance machine. Although
the memory was 64 bits+parity wide (for ECC) the main data
path was only 16-bits wide, and the microcode word was
rather vertical, so while 360/50 and 360/65 could execute
simple instructions in about 4 microcode cycles, the /145
took something like 7+. A 32 bit add register to register
was 1.4 us, add memory to register was 2.4 us. Floating
point divide was 28 us (short) or 88 us (long).
Jon
