> On Apr 12, 2016, at 3:55 PM, E. Groenenberg <[email protected]> wrote:
> ...
> Closer inspection showed that the pawl of the advancing/return section
> was barely moving. With the application of WD40 using a small brush
> loosened the gummed up oil/grease and with some more cleaning and light
> machine oil it was behaving as it should.
Be sure to remove the WD40 thoroughly. It's occasionally claimed to be a
lubricant, but that is not true at all. If you use it as one, you will end up
with exactly the problem you ran into.
paul
