tisdag 15 november 2016 skrev Kyle Owen <[email protected]>: > A lot of antique radio restorers prefer to cut open the can near the base, > remove the innards, and replace it with a modern (much smaller) capacitor. > Gluing it back together and polishing it up can make it look pretty close > to original. > > Here's a pretty good write-up: > http://www.faultlineaudio.net/the-work-bench/2013/1/15/ > restuffing-a-multi-section-can-capacitor.html
This was a really good description on how to do it. I will look into this method unless I find something else. I maybe wasn't clear on that I already replaced the cap with a few simple leaded types. It was not such a good fit mechanically so although I am not fanatic of preserving the innards of the machine it would very good to have cap with the original type of pin layout. /Mattis > Kyle >
