> From: William Degnan
> Tried my M7838 EIS this morning. It is bad or there is a config/jumper
> issue to investigate.
When installing the KE11-E, you have to remove a jumper on the CPU's M7233
module. See pg. 2-1 on the KE11-E/KE11-F User's Manual (EK-KE11E-OP-001),
available online. Did yours come with the three flat cable jumpers?
If it's still not working, the KE11-E/KE11-F Technical Manual
(EK-KE11E-TM-002), also available online, will undoubtly prove useful.
Noel
