John or anyone...regarding this:
> > > The v3.2 version I have from bitsavers has the baseline disk a few > bytes larger than > an RL01 so simH autosized it (incorrectly) to an RL02. Hopefully > Mark’s new sizing > code should avoid this in the future. To copy an RL01 RSX disk to > an RL02 you can use > BRU (Backup and Restore Utility). Get the magtape image > BB-L974F-BC_RSX11M_4.5_BRU64K.tap from bitsavers. Attach your > RL01 image to > rl0 and create a new RL02 image attached to rl1. Boot the magtape: > > first device is dl0: > second device is dl1: > > > I have made the bootable RL01 image and it works in simH. I have BB-L974F-BC_RSX11M_4.5_BRU64K.tap in place but what kind of tape device do I set in simH to attach it? I need to attach prior to booting and the within RSX11/M > At the “>” prompt type “run bru” > At the “BRU>” prompt type “/init dl0: dl1:” and it will perform the copy. If you copied the > baseline system, you should be able to boot the newly created RL02. I have named the blank RL02 rlRSX11M.dsk Almost there! BIll
