Paul Koning wrote:
>
> > On Feb 17, 2017, at 2:35 PM, Noel Chiappa <[email protected]> wrote:
> >
> > ...
> >> From: Guy Sotomayor Jr
> >
> >> In terms of community supplied libraries, Eagle has those too and I've
> >> found that by and large they are junk (it's easier/quicker for me to
> >> create a part on my own
> >> ... While I haven't seen a lot of KiCAD contributed libraries (that's
> >> part of the problem)
> >
> > KiCAD came with a fairly large set of user-contributed libraries. For
> > various
> > reasons (including working with archaic parts), I've wound up adding quite a
> > few, but i've usally found it pretty easy to modify an exising part from the
> > libraries, to get what I need. YMMV.
>
> One thing I learned with Eagle (an old version -- I started with it on DOS,
> with a physical license dongle) is that you can define library stuff via
> scripting. This is very helpful when defining 120-pin PCB footprints.
I've made pcbnew footprints for PLCC Sockets in the past with some
scripting. In the meantime the footprint format has changed to that
.pretty. I don't had to make footprints with such big pincounts sine
them again, but I don't think they made it simpossible to use scripting
for that at all.
>
> I don't remember precisely, but I think you can export libraries from Eagle
> in some sort of text form. If that's true, then it would be SMOP to write a
> KiCAD library importer. The key question is whether the library semantics
> are compatible. EAGLE is rather nice in the way it handles schematic symbols
> vs. footprints and all that.
You can select footprints corrsponding to a part in the schematic editor
for each part. What's the problem?
>
> I used EAGLE long ago for one project, and more recently for another, but I
> haven't found it sufficiently useful to buy it a second time to get the
> non-free version. Not that I really need the autorouter, it isn't really all
> that useful. But still, it's pretty steep for a hobbyist. I discovered
> KiCAD, haven't used it yet, should give it a try.
>
> One nice aspect of EAGLE is that a number of PCB fab shops will accept EAGLE
> *.BRD files directly, rather than asking for Gerber and drill files.
>
> paul
>
Why is that nice? This way the pcb company has your "sourcecode".
Besides of that where is the real difference to going to
"File->Plot", Select "Gerber" and push the "Plot" Button?
That can't really be to difficult...
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
[email protected] Fax +49 3731 74200 Tel +49 3731 74222 Mobil: 0172 8790 741
