On Fri, Apr 21, 2017 at 6:24 PM, Rob Jarratt <[email protected]> wrote: > > >> > My back of the envelope calculation comes to approximately >> > 4 million miles of paper tape. >> >> I think you're out by a factor of 10.... 267*10^9 bytes, divide by 10 as >> there are >> 10 bytes to the inch on paper tape, and convert to miles. I get just over >> 400,000 >> miles. >> > > Agreed, I measured a piece of paper tape I have here and got a figure of 0.9 > inches > per 10 bytes, so clearly just a bit of finger trouble somewhere in my > calculation.
I think you've made a fencepost error here. There will, indeed be 0.9" between the centre line of one byte and that of the tenth byte after it. But you are forgetting to include the gap on one end of that block (if you see what I mean). The holes on paper tape (at least the normal 5 level and 8 level stuff, typesetter tape may well be different) fall on a 0.1" matrix. I once made an emergency splicing jig for paper tape using a bit of stripboard with some pins soldered in. So there are exactly 10 characters per inch on paper tape. > Still, almost enough for a round trip to the moon. True... -tony
