Hey Jim, I can probably do this for you but I'm pretty busy for the moment. What's your desired timeline? I've been using EAGLE since 2005 so I'm familiar.
=] -- Anders Nelson +1 (517) 775-6129 www.erogear.com On Wed, May 10, 2017 at 8:23 AM, Doug Ingraham via cctalk < [email protected]> wrote: > If this is a one off all you need to do is print the negatives on > transparency material with a laser printer. > The laser printers tend to have a little more opacity than ink jets do but > I have done this with an ink jet > printer as well. I also once plotted directly on the bare copper with a > sharpie and had it turn out ok. > > Align the negatives on the sensitized board stock. > Expose. > Develop. > Etch. > Drill > Solder in your feed throughs. > Put the parts on the board. > Debug > > If on the other hand you want to make even 5 boards you would be better off > with your approach. > > Best wishes! > > -- > Doug Ingraham > PDP-8 SN 1175 >
