> -----Original Message----- > From: cctalk [mailto:[email protected]] On Behalf Of Noel > Chiappa via cctalk > Sent: 27 October 2017 18:25 > To: [email protected] > Cc: [email protected] > Subject: RE: RK05/BA11 slides > > > From: "Rob Jarratt" > > > Thanks for this info Noel. > > Sure; I figured it would be useful to someone, glad to know it was. > > > So it sounds like I would need the C-230-S-124. ... My metalworking > > abilities are limited. > > If you don't want to have to do any mods, the C-230-S-122 is a straight bolt-in, > albeit $30 or so more than the -124, which requires.. > > > I am not clear from the picture you linked to, what the modification is? > > Drilling the two holes. > > Noel
Ah I misread your email as suggesting that the 124 was more suitable than the 122, but if the 122 is the better fit then so much the better. My H960 is not very accessible but I attempted to measure it front back and it may be 25". Do you know where should the length be measured? Regards Rob
