On 2017-Dec-14, at 10:20 PM, Chuck Guzis via cctalk wrote: > On 12/14/2017 08:58 PM, Gregory McGill via cctalk wrote: >> I recently picked this up from shopgoodwill and it has an older power >> plug. It is NOT a standard plug as shown in the picture below that is too >> tall and pins are smaller etc.. >> >> Anyone know the name of this 'standard' so I can find a cable? Or possibly >> have one around I can get from you? >> >> Greg >> >> https://sgws3productimages.azureedge.net/sgwproductimages/images/8/11-25-2017/310248925111157io.JPG >> https://photos.app.goo.gl/HzXVUDqfCv5U7zBC2 >> > > From the looks of your unit, it might just be simpler to fit it with a > standard IEC receptacle. Note that the cutout is already rectangular, > so an IEC may just fit without any case modification.
The screw holes have a slightly different spacing between the two types, they have to be 'moved' (filed) out about a mm each; and it looks like the existing opening will have to be enlarged vertically a bit. If there's nothing interfering on the inside it does look like an easy candidate for replacement with IEC.