80-pin is SCA. Definitely no SCA disks in there.
The blue ones should be 68-pin, and the beige ones 50-pin.
Like I said though, double-check me :)
Good luck, and have fun!
From: Douglas Taylor <dj.tayl...@comcast.net>
Sent: Sunday, February 4, 2018 8:17 PM
To: Benjamin Huntsman; General Discussion: On-Topic Posts
Subject: Re: DEC Storageworks
Jbod. Didn't know what it meant until today. The computer has 4 SCSI
controllers, the Storageworks is operated in a split configuration. 4
drives are on a RAID controller, the other 3 are on a normal SCSI
What I was getting at with replacing the disks in the carrier was
exactly what you mentioned; LVD or HVD SCSI. I don't know what is in
there. Is it 50 pin or 68 or 80 pin.
On 2/4/2018 9:53 PM, Benjamin Huntsman wrote:
> I want to say the difference is in HVD vs LVD SCSI ... unless you’ve swapped
> out the guts yourself, I’d not mix and match...
> Then again it’s been forever since I monkeyed with those things and I could
> be mistaken...
> As for opening them, I’ve cracked them open before. It’s possible, but they
> were not manufactured to have their drives replaced easily... I damaged one
> last time I tried... be careful.
> Do you have the controller too, or just the jbod?
> Sent from my iPhone
>> On Feb 4, 2018, at 1:42 PM, Douglas Taylor via cctech
>> <cct...@classiccmp.org> wrote:
>> The alphaserver 1000a I have has a storageworks array.
>> The disk carriers are green in color, I see storageworks disks for sale on
>> ebay that are blue. What is the difference? Are they interchangeable?
>> Is it possible (or even wise) to open one of the green carriers and change
>> the disk out?