Just picked up an IBM System/36 5362 tonight. It is in pretty good physical condition with just a few minor scratches - other than needing a thorough cleaning. It has 2 60 MB hard disks in the unit. Not sure of the RAM capacity. Missing the the mode hard key.
A few of us tried to get it running tonight. It came with a 3179 twin-ax terminal but no keyboard. We connected the terminal via a twinax cable direct from port 0 to the terminated Y adapter on the terminal. Never got any output on the terminal at any time other than the fairly empty status line. The S/36 front panel console light did illuminate after we connected the terminal. The key was locked to Normal but we were able to by-pass it with a jumper to get it into Service mode. The media that came with it only had disk 1 of an SSP release and we could not get that to IPL from floppy (mode 3 / panel 1000). It stepped the head motor forward and back a couple times, engaged the head, then immediately threw an error code. Any idea where I can get an SSP release for the S/36 5362 and how to write it to 8" floppies? Also where I might find a keyboard for the terminal and what can be done if anything to gauge the health of the hard drives? -Alan H.