Rob, Might be an issue with the card. The KZQSA was officially only supported for CD-ROM and Tape.
http://www.microvax2.org/files/KZQSA%20Jumper%20Settings.htm (towards the bottom)... ... have you tried with a real SCSI drive? Dave > -----Original Message----- > From: cctalk <[email protected]> On Behalf Of Rob Jarratt via > cctalk > Sent: 16 March 2019 10:29 > To: General Discussion: On-Topic and Off-Topic Posts > <[email protected]> > Subject: SCSI2SD on VMS 5.4 > > I have been experimenting with a SCSI21SD V6 card trying to get it to work on > a VAX 4000-200 running VMS 5.4 using a KZQSA. It seems to recognise that > there is a SCSI device there, but any attempt to access the device from VMS > 5.4 results in a Fatal Drive Error. I tried booting a VMS 7.3 image from the > SCSI2SD card and that worked. > > > > Obviously I have played with some of the settings, like SCSI2 mode etc, but I > have not found anything that works. Has anyone succeeded in getting this > board to work on VMS 5.4? > > > > Thanks > > > > Rob
