11/93 Rebuild

[Rod Smallwood via cctalk]

Hi Guys

       Well the RD53 in my 11/93 finally clapped out.
       The CPU is a late model KDJ11-E with everything on the one board.

       So its a switch from MFM to SCSI Drives.

       A CQD220A will drive the hard disk and the RQDX3 will stay to 
look after the RX50

       I've  put the Hard Drive on the primary CSR address (17772150) 
and I will shift the RQDX3 to an alternate CSR

       Comments as to if this is the right way round and what CSR's to 
use for the two controllers invited.

      Rod


--