sön 2020-04-26 klockan 19:33 -0400 skrev Chris Zach via cctalk: > Ok, so this evening I went back to the house to do a quick evacuation > of > the most critical stuff and take some better pictures. This time I > brought a massive xeon flashlight which helps to get quicker > pictures > with less shake. > > I also picked up a pile of Perq boards, and all the DC600 tapes and > floppies I could take out. The car was loaded with them, someone is > going to have to curate these. But since I know that the most > important > thing is the software and not the hardware I decided this is what to > get > as the top priority. > > There appears to be a third Perq in there as well on the other side > of > the basement. No big drives (14 inch or 8 inch) but a lot of MFM and > SCSI disks. Couldn't grab those, too heavy. >
Considering that i see at least one SMD controller in 0273 (xy 7053-105) Could it be case that somewhere is pedestals and CABLES ? Original issue Sun SMD cables is unobtanium, a number of people on the list recently discussed copying the cables, but when you don't have any originals one to study.... 0271: at least one 3/60 cpu (serial b, ser a, scsi, video) 3/260,3/280: sio a, sio b, ethernet, reset/norm/diag keyboard "walking leds" video (ecl) 0275: that card with a flat cable, that is i think a 3/80 cpu It is enough to stuff to configure a rather beefy 3/80, a big enough vme-crate...
