Wayne/Ian/Marc reckoned > This place has the 2de19p connectors in their catalog. > Kinda pricey though. > https://www.onlinecomponents.com/keywordsearch.aspx?text=2de19p&pagenum=2 > > > On Aug 19, 2020, at 17:48, Ian Finder via cctalk <[email protected]> > wrote: > > It's actually an ITT CANON ***2DE19P***, not a DE19 as Marc indicates. > > On Wed, Aug 19, 2020 at 1:48 AM Curious Marc via cctalk < > [email protected]> wrote: > > We had the same problem. It’s a DE-19 connector, fits in the same envelope > has a DB-9, but 3 rows instead of 2. You can see in this video right around > here: https://youtu.be/GMp5EAq-Elo?t=541 . ITT-canon used to make these. > You can look them up on eBay, which is where we found ours. Make sure you > don’t get a two row DB-19, which is a completely different animal. > Marc
Wayne, Ian, Marc, Thank you very much for pinning that one down for me so quickly. Yes they are fairly pricey, but at least that's a better price than Mouser. I had a thought, that if the pin spacing was on par with say a common 15-pin VGA male connector I could buy a bunch of dirt cheap Golden Dragon ones, set them up in the mill and run a high speed slitting saw diagonally between the pins (right though the block and metal surround in one go), and just add a plastic spacer to bump it out to the length of the 19-pin. After all there are only 6 pins used, and of those, just one (assuming common) that would be on the extended bit. Steve.
