On Thu, 15 Oct 2020, Richard Cini via cctalk wrote:
Well, it looks like one of those memory/multi-IO/clock boards like the AST
RAMPACK+. I would take a look at this site (which you might already know):
https://stason.org/TULARC/pc/memory-cards/index.html
When I was looking for jumpers, etc., for both the AboveBoard AT and BOCARAM I have, I
started here. Maybe if you browse the links, something will pop-up. I know that these
boards often have special drivers for expanded memory; extended memory should just
"show up". I would hope that the other ports/devices (clock, parallel, serial
and game) are at standard PC addresses.
For an 8 bit multi-function card of that era, there would be hard switches
for memory starting address (NO "Extended" nor "Expanded" RAM), and, since
the 5150 supported multiple parallel and serial ports, switches for
identifying which ones of those they would be.
If you plug it into a 256K PC, with no serial and parallel, . . . \
The RAM is PROBABLY set to start at 256K.
If there are no other serial and parallel ports, then various diagnostic
programs will tell you whether the parallel is LPT1, LPT2, ...
and the serial as COM1, COM2, ...
--
Grumpy Ol' Fred [email protected]
