On May 23, 2021, at 10:37 AM, emanuel stiebler <[email protected]> wrote: > > On 2021-05-21 16:38, Zane Healy via cctalk wrote: >> Is anyone familiar with the 4000/90 diagnostics? It looks like it will fail >> the test of the LCSPX graphics board, if it’s not plugged into a monitor, or >> is missing a loopback device. Is that correct? >> >> T 2 fails, but the manual makes it sound like I need a loopback > > IIRC, it is normal that it fails, without a monitor attached. > Did you try to switch to serial console, if it still complains?
I suspected that was the case. I’m currently only on a serial console, until I solve my monitor cable problems. >> T 100 succeeds when testing the LCSPX graphics board. > If you have amonitor attached, you would see some colors flipping and > some drawing being made on the screen Once I get a monitor attached, I plan to run it through the full screen diagnostics. >> The system had been a boat anchor until a short time ago, as the battery in >> the Dallas DS1287A RTC was dead. Amazon just delivered two DS12887’s. Once >> I replaced it, it came right up. I was surprised to see I had a 4GB and a >> 2GB drive in it. > > Which ones did you get? (source?) > Have to fix another two in the near future … DS12887+ from Amazon. >> Now to dig out the mouse, and wait for the parts to hook it up to a monitor. >> :-) > > Yes, the monitor cable is fun to look for … I should have a monitor cable by Thursday, assuming I don’t find the one that I’m sure I have before that. Since I’ve been searching for the cable for several months, I decided to buy one off eBay, and I have the parts I should need to hook it up to a modern monitor. Wow! FedEx just delivered the cable, so I guess I’ll be hooking it up shortly. It looks brand new. When I dug back to the mice, I found I have two VSXXX-AA hockey puck mice, so I’m even more convinced that I have a monitor cable somewhere. I also found a AUI loopback with the mice. The next part I need is a C15 power cable for MicroVAX 3300, I’ll see about picking that up tomorrow or Wednesday. I don’t believe that I’ve ever tested the MicroVAX 3300. A friend gave it to me when he was moving out of his apartment. Given that it’s only 2.4 VUPS, I can’t see me doing anything with it at this point. I should also test my MicroVAX III while I’m at this. Zane
