> On 13 Jul 2021, at 23:20, Antonio Carlini via cctalk <cctalk@classiccmp.org> 
> wrote:
> 
> On 13/07/2021 22:34, Douglas Taylor via cctalk wrote:
>> On 7/13/2021 3:30 PM, Adrian Graham via cctalk wrote:
>>> Hi folks,
>>> 
>>> Powering up with nothing attached apart from an MMJ/H8571 cable I get
>>> nothing on the console, I'm using PuTTY via a genuine COM1 port on a PC
>>> which is one level above what I used last time I powered the machine up
>>> (FTDI USB adapter to a laptop). Diagnostic LEDs cycle through the tests and
>>> end up at '1111 0011' which according to the manual is 'entering the
>>> console program'.
>>> 
>> There are 2 ways to have a console on the VAX4000/VLC.  A switch on the back 
>> selects either; (1) graphics console mode, or (2) terminal attached to the 
>> serial port.  It sounds like you have the switch set to graphics console 
>> mode, in that case you get nothing from the serial port.
>> 
>> I can't remember where the switch is on the back, bitsavers or someone who 
>> remembers can help.
>> 
>> Doug
>> 
> If you look from the front it's on the right hand side and marked "S3", 
> between the grey reset switch and the keyboard connector. I think that S3 
> needs to be UP otherwise it would expect a monitor and keyboard to be 
> attached.
> 
> The MMJ connector is on the back (but obviously Adrian has found that ... or 
> he's pushed really, really hard into either the keyboard connector or the 
> phone connector :-))

Bear in mind I’m an old DEC head and have been since the early 80s ;) Though I 
HAVE seen customers get RJ11 cables jammed in MMJ ports before, because ’they 
look alike’.

Both of you missed my sentence where I said ‘It doesn’t matter what position I 
have S3 in’, and IIRC even with S3 set to graphics you would still get a dead 
sergeant on a VT once init had completed, you just wouldn’t see POST. 

Anyway, I’ll hook up a VT today at some point and see if anything happens.

Cheers

-- 
Adrian Graham
Owner of Binary Dinosaurs, the UK's biggest private home computer collection?
t: @binarydinosaurs    f: facebook.com/binarydinosaurs
w: www.binarydinosaurs.co.uk





Reply via email to