On 2021-Jul-24, at 2:36 AM, DI Gerhard Kreuzer via cctalk wrote: > I own a Pro-Log M980 Prom Programmer and want to program a 2732 EProm. I > have everything needed, but how can I get the data in? > There is a serial interface, did anybody have some program for a standard > PC to handle that daa transfer? > Cabling istn't an issue, can do it. > > Thanks for helping.
Do you not have the manual? The M980 manual is on bitsavers. I have the slightly earlier M900 model, by the front panel they're quite similar. I've used it for programming 2716s, although it's been a few years. IIRC it's an ASCII-format protocol for RS-232 serial, so you just have to have a terminal program you can dump a file through. Be careful about the hardware communications interfaces. The 9-pin D connector labeled 'serial interface' is not the RS-232 serial standard. There were several firmware and hardware communication options. Do you have the pro-log adapter, or are you making an assumption about what's there? My unit had the RS-232/serial firmware option but was missing the RS-232 adapter, so I had to build one (can be done with just a MAX232 IC).
