This seller just had that kind of cruddy 11/05 for sale recently, this item is in nicer shape, but I would not expect it to work "out of the box". It may have been the companion RAM to the 11/05. I have a similar set up for my 11/40 (in full sized chassis, etc. but same principle).
On Fri, Aug 20, 2021 at 7:04 PM Steve Malikoff via cctalk < [email protected]> wrote: > I just saw there is an ME11 Memory Expansion unit on eBay (not mine), > stamped 'M11'. > https://www.ebay.com/itm/114941479208 > Until seeing this one I had not heard of any other units out there apart > from the one I recovered > (ex-BHP steelworks) a few years ago. Mine was connected by a flexprint > cable to a rebadged PDP-11/15. > > If anyone here ends up with it, I have an OpenSCAD model of the Mazak > bracket p/n 1211221 that holds > the regular 5-1/4" DEC fascia panel onto the front of the H-909 cabinet > this unit uses. > > This is the same cabinet as the slimline PDP-11/05 and to be honest when I > found the ME11 that's > what I thought it was, and that the console and CPU boards were missing. I > then found the fascia panel > with the original brackets close by, and it fitted exactly. > > I've printed a few from PET and they work as well as the originals > (including the threaded hole), so > I could do a few more for whoever gets the eBay one should they want them. > > I am slowly scanning the ME11 print set too as I've not found any online > copy out there so far. > > Steve. > >
