On Sun, Oct 31, 2021 at 6:55 AM Josh Dersch <[email protected]> wrote:
> Yes, this matches what the service docs explain, sounds like the same machine. I am pretty sure I have the ICL service manual for this machine. It's pretty much a 'boardswapper guide' but I can see if it says anything about aligning the photocells. I do remember it tells you not to dismantle the hammer bank, something I read _after_ I had stripped and reassembled it. > > > I should have been more clear -- only the top of the finger is missing, the > bottom is still present, so it should in theory be generating proper pulses. OK, that should work > > I should see if I can pull the assembly out and clean it, I suppose if the > optical sensors are dirty it'd be a problem. >From what I remember the hammer bank/belt pulley unit comes out quite easily. I'd do that first, you will then have better access to the photocell unit. -tony
