Hi Gerhard, The Farnell plugs seem to be 2 mm not 0.1". I suspect the Pomona plugs you mentioned earlier will be a better fit. You need at least 100 leads which means at least 200 plugs. I would get samples of both types before committing to a larger purchase.
Best regards Tom On Mon, Mar 14, 2022 at 4:55 PM DI Gerhard Kreuzer < [email protected]> wrote: > Hi Tom, > > here another source/manufacture .. > > 2550327.pdf (farnell.com) <https://www.farnell.com/datasheets/2550327.pdf> > > With best regards > > Gerhard > > Zitat von Tom Hunter <[email protected]>: > > Hi Gerhard, > > Yes - these look good but the price is much higher than what I paid. As I > no longer work, modifying the cheap Chinese banana plugs was viable. If you > still work and are time limited then the Pomona plugs may be the better > option. It may be best to get a small number first to try before committing > to a larger order. > > Best regards > Tom > > > > > On Mon, Mar 14, 2022 at 1:06 AM DI Gerhard Kreuzer < > [email protected]> wrote: > >> Hi Tom, >> >> what do you think about this parts: >> >> Microsoft Word - D5936.doc (mouser.at) >> <https://www.mouser.at/datasheet/2/159/D5936-1514588.pdf> >> >> Looks like 0.09" diameter. >> >> With best regards >> >> Gerhard >> >> Zitat von Tom Hunter <[email protected]>: >> >> Hi Gerhard, >> >> I used the following banana plugs: >> >> https://www.aliexpress.com/item/1005002907717547.html >> >> Please note that only about 30% of the plugs I received were a good fit. >> The rest I had to modify. >> >> I had to remove the barrel shaped contact spring and compress it >> carefully to open it up to make good contact with the sockets. >> I also soldered the barrel shaped contact spring onto the plug body. It >> is a lot of work to make the patch cables with plugs which don't quite fit, >> but with the modification the result is now neat and usable. >> >> I couldn't find anything else with a better fit. The original 0.1" taper >> pins are "unobtainium". >> >> Regards >> Tom >> >> >> >> On Sun, Mar 13, 2022 at 7:18 PM DI Gerhard Kreuzer via cctalk < >> [email protected]> wrote: >> >>> Hi, >>> I also have an H500 waiting for restoration. >>> Maybe anyone can give better winfos about the plugs/connectors of the >>> patch cables. >>> >>> I didn't have any, I have to make new. >>> >>> With best regards >>> >>> Gerhard >>> >>> Zitat von [email protected]: >>> > Send cctalk mailing list submissions to >>> > [email protected] >>> > >>> > To subscribe or unsubscribe via the World Wide Web, visit >>> > http://www.classiccmp.org/mailman/listinfo/cctalk >>> > or, via email, send a message with subject or body 'help' to >>> > [email protected] >>> > >>> > You can reach the person managing the list at >>> > [email protected] >>> > >>> > When replying, please edit your Subject line so it is more >>> > specificthan "Re: Contents of cctalk digest..." >>> >> >> >> > > >
