That’s a good idea, I will try that
From: Mattis Lind <[email protected]> Sent: Tuesday, May 2, 2023 7:55 AM To: [email protected]; General Discussion: On-Topic and Off-Topic Posts <[email protected]> Cc: Rob Jarratt <[email protected]> Subject: Re: [cctalk] Re: Rainbow H7842 PSU Fault Not quite sure what you mean here. I had advice from a friend to bench test the control module by providing 14V to the input of the 7812. On the good PSU I can see the PWM operate, on the bad one the PWM is shutdown. And what happens if you feed in exactly 12 V on the output of the 7812? Would the PWM work then? By using a lab supply you could check if the circuit is sensitive to variation in the 12V supply. /Mattis Regards Rob
