I just acquired a TRS-80 model 102, my first of that model.
Everything is great other than three keys. The 2 keys works intermittently, q, and [ don't work. Having checked the schematic, the keys have no commonality on the circuit.
Before I pull the cap off the switch, I know that the rubber dome inside has material on the inner part that meets with the silver contacts to complete the circuit. I'm told this material will wear out or lose conductivity.
I reflowed the solder joints on the pcb and this didn't help. Other people have simply replaced the rubber dome from another dead 102's keyboard. But, I'd rather attempt applying new material inside that dome.
I'm hoping there is an inexpensive and mainstream solution I can buy at home depot or something.
Any tips? Daniel sysop | Air & Wave BBS finger | [email protected]
