---------------------------- Original Message ---------------------------- Subject: EAI TR-10 Patch Plugs From: "Dave Wade" <[email protected]> Date: Sun, December 20, 2015 6:41 am To: "'General Discussion: On-Topic Posts'" <[email protected]> --------------------------------------------------------------------------
> Folks, > > I own an EAI TR-10 analog computer which sadly came without any patch cables > and accessories. Normally this wouldn't be a problem, BUT the TR-10 comes > with special resistive plugs which go at the ends of the patch leads. These > have a 4mm plug and socket with a 10k or 100k resistor in between. I can't > figure out a way to easily fabricate replacements. I can easily obtain 4mm > plugs and sockets, and solder a resistor between them, but when I try and > mount them on a short rigid tube all my efforts fail. The plug and socket > need to be twisted in opposite directions and any soldered joint just fails. > > Any usggestions? > > Does any one have some of these and if so how are they constructed? > > Dave Wade > G4UGM > Would you be able to put up some photos of what you have, an original, and with a ruler included for scale? Steve.
