Adam, IBM used the same cable on the RS6000 and these pop up on e-bay from time to time. You do need a monitor that will support sync-on-green
Dave > -----Original Message----- > From: cctech <[email protected]> On Behalf Of Jonathan > Stone via cctech > Sent: 04 May 2021 01:31 > To: General Discussion: On-Topic Posts <[email protected]>; Adam > Thornton <[email protected]> > Subject: Re: That VAXStation4000vlc 3W3 video connector > > You need a video cable with a 3W3 connector on one end. Original was likely > a DEC BC29G-10. > That, plus 5BNC-to-VGA cables, and 3 F/F BNC barrels, will work with a > multisync monitor that handles sync-on-green. > > I just went through this with several DECstations, where the Turbochannel > graphics options have the same 3W3 connector. > On Monday, May 3, 2021, 04:23:05 PM PDT, Adam Thornton via cctech > <[email protected]> wrote: > > I assume it would be way too much to hope that HD BNC would fit it? Does > anyone have a pointer to the actual physical dimensions of the itty-bitty BNC- > ish connector in the video port of the VAXStation4000vlc? If I can get red, > green, and blue out (assuming since there are only 3 connectors it's > sync-on-green) I can put together a sync splitter and turn it into VGA. I > have > at least one decent multisync VGA monitor still, although none with the RGB > BNC inputs. > > Adam >
