>From [EMAIL PROTECTED] Fri Jun 16 17:57:38 2000
>I'm trying to write a multi-session disc with my HP 9210i (SCSI), but
>it fails with the error message below. Does anyone know what can cause
>it? I upgraded to the latest version of the formware and it keeps
>happening. No problems with single-session CDs though.
>Should I write the cdrecord author about this?
>Here's the log:
>Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
>TOC Type: 3 = CD-ROM XA mode 2
>scsidev: '6,0'
>scsibus: 0 target: 6 lun: 0
>Using libscg version 'schily-0.1'
>atapi: 0
>Device type : Removable CD-ROM
>Version : 4
>Response Format: 2
>Capabilities : SYNC
>Vendor_info : 'HP '
>Identifikation : 'CD-Writer+ 9200 '
>Revision : '1.0e'
>Device seems to be: Generic mmc CD-RW.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags : SWABAUDIO
>Drive buf size : 4183808 = 4085 KB
>FIFO size : 4194304 = 4096 KB
>cdrecord: WARNING: Track size unknown. Data may not fit on disk.
>Track 01: data unknown length
>Total size: 0 MB (00:00.00) = 0 sectors
>Lout start: 0 MB (00:02/00) = 0 sectors
>Current Secsize: 2048
>ATIP info from disk:
> Indicated writing power: 5
> Is not unrestricted
> Is not erasable
> ATIP start of lead in: -11324 (97:31/01)
> ATIP start of lead out: 359849 (79:59/74)
>Disk type: Long strategy type (Cyanine, AZO or similar)
>Manuf. index: 22
>Manufacturer: Ritek Co.
>Starting to write CD/DVD at speed 8 in write mode for multi session.
>Last chance to quit, starting real write in 1 seconds.
>Waiting for reader process to fill input buffer ... cdrecord: Input/output error.
>mode select g1: scsi sendcmd: retryable error
>status: 0x2 (CHECK CONDITION)
>input buffer ready.
>CDB: 55 10 00 00 00 00 00 00 44 00
>Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 26 00 00 8B
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
>Sense flags: Blk 0 (not valid) error refers to data part, bit ptr 3 (valid) field ptr >0
>cmd finished after 0.021s timeout 40s
>cdrecord: Warning: using default CD write parameter data.
>cdrecord: Cannot open new session.
>cdrecord: fifo had 128 puts and 0 gets.
>cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>Mode Select Data 00 11 00 08 00 00 00 00 00 00 08 00 05 32 01 C4 08 00 00 00 20 00 00
>00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00 00 00 00 00 00 00 00 00 00 00 00 00
>(Please note that I'm using a 80-minute disc here, but it happens with
>standard 74-minute discs too. The parameters to cdrecord were:
>dev=6,0 speed=8 -v -multi. I tried other speeds up to 1 and it doesn't
>help.)
Sony drives do not support X disks from firmware.
Read README.sony
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
