hello~
Now that im finally on this list, please bear with my long tirade ( apparantly
i have been sending mail to the wrong place :P)
i am using kernel 2.2.16
Im having some difficulty with cdrecord, i have succsessfully installed the
scsi emulation into the kernel as modules, ie, a cdrecord --scanbus says:
cdrecord 1.8.1 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'HP ' 'CD-Writer+ 7500 ' '1.0a' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
Originally, I was using gtoaster as a front end, and the error output looked
like this:
Cdrecord 1.8.1 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg
Schillingscsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 7500 '
Revision : '1.0a'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Starting to write CD/DVD at speed 1 in dummy mode for single session.
Last chance to quit, starting dummy write in 9 seconds. 8 seconds. 7
seconds. 6 seconds. 5 seconds. 4 seconds. 3
seconds. 2 seconds. 1 seconds.
CDB: 55 10 00 00 00 00 00 00 10 00
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 26 00 00 80
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to data part, bit ptr 0 (not valid) field
ptr 0
cmd finished after 0.008s timeout 40s
cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
CD recording process finished.
so! after reding ALL i could find, and not finding any information on that
specific error, i decided to try another frontend, seeing how gtoaster had
undecipherable default settings.. Now im using gcombust, which seems MUCH nicer
btw, and heres the scoop:
A dummy burn outputs:
drecord 1.8.1 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 7500 '
Revision : '1.0a'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1048576 = 1024 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 2 MB (00:14.36) no preemp pad
Track 02: audio 2 MB (00:15.44) no preemp pad
Track 03: audio 8 MB (00:49.74) no preemp pad
Track 04: audio 9 MB (00:57.40) no preemp pad
Track 05: audio 3 MB (00:20.05) no preemp pad
Track 06: audio 5 MB (00:29.88) no preemp pad
Track 07: audio 3 MB (00:21.52) no preemp pad
Track 08: audio 5 MB (00:34.45) no preemp pad
Track 09: audio 7 MB (00:46.72) no preemp pad
Track 10: audio 6 MB (00:37.59) no preemp pad
Lout start: 58 MB (05:47/20) = 25895 sectors
Current Secsize: 2048
ATIP start of lead in: -11640 (97:26/60)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 333954
Starting to write CD/DVD at speed 2 in dummy mode for single session.
Track 01: 0 of 2 MB written. WARNING: padding up to secsize.
Track 01: Total bytes read/written: 2534604/2535456 (1078 sectors).
Track 02: 0 of 2 MB written. WARNING: padding up to secsize.
Track 02: Total bytes read/written: 2724989/2725968 (1159 sectors).
Track 03: 0 of 8 MB written. WARNING: padding up to secsize.
Track 03: Total bytes read/written: 8774744/8775312 (3731 sectors).
Track 04: 0 of 9 MB written. WARNING: padding up to secsize.
Track 04: Total bytes read/written: 10126913/10127712 (4306 sectors).
Track 05: 0 of 3 MB written. WARNING: padding up to secsize.
Track 05: Total bytes read/written: 3538363/3539760 (1505 sectors).
Track 06: 0 of 5 MB written. WARNING: padding up to secsize.
Track 06: Total bytes read/written: 5271301/5273184 (2242 sectors).
Track 07: 0 of 3 MB written. WARNING: padding up to secsize.
Track 07: Total bytes read/written: 3796451/3798480 (1615 sectors).
Track 08: 0 of 5 MB written. WARNING: padding up to secsize.
Track 08: Total bytes read/written: 6077126/6077568 (2584 sectors).
Track 09: 0 of 7 MB written. WARNING: padding up to secsize.
Track 09: Total bytes read/written: 8241865/8243760 (3505 sectors).
Track 10: 0 of 6 MB written. WARNING: padding up to secsize.
Track 10: Total bytes read/written: 6631334/6632640 (2820 sectors).
Writing time: 179.626s
WARNING: Some drives don't like fixation in dummy mode.
/usr/bin/cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable
error status: 0x2 (CHECK CONDITION)
/usr/bin/cdrecord: fifo had 1892 puts and 1892 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1451 times full, min fill was 84%.
^^^^ i am assuming the error is due to the dummy write??? Anyone else know??? I
have had no prior trouble with dummy writes. I did, btw, have this ALL working
in a previous install ..sigh..
So then, thinking it was just an error in dummy writes, i proceeded to try a
real write with THIS output:
Cdrecord 1.8.1 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 7500 '
Revision : '1.0a'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1040128 = 1015 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 2 MB (00:14.36) no preemp pad
Track 02: audio 2 MB (00:15.44) no preemp pad
Track 03: audio 8 MB (00:49.74) no preemp pad
Track 04: audio 9 MB (00:57.40) no preemp pad
Track 05: audio 3 MB (00:20.05) no preemp pad
Track 06: audio 5 MB (00:29.88) no preemp pad
Track 07: audio 3 MB (00:21.52) no preemp pad
Track 08: audio 5 MB (00:34.45) no preemp pad
Track 09: audio 7 MB (00:46.72) no preemp pad
Track 10: audio 6 MB (00:37.59) no preemp pad
Lout start: 58 MB (05:47/20) = 25895 sectors
Current Secsize: 2048
ATIP start of lead in: -11640 (97:26/60)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 333954
Starting to write CD/DVD at speed 2 in write mode for single session.
Performing OPC...
Track 01: 0 of 2 MB written. WARNING: padding up to secsize.
Track 01: Total bytes read/written: 2534604/2535456 (1078 sectors).
Track 02: 0 of 2 MB written. WARNING: padding up to secsize.
Track 02: Total bytes read/written: 2724989/2725968 (1159 sectors).
Track 03: 0 of 8 MB written. WARNING: padding up to secsize.
Track 03: Total bytes read/written: 8774744/8775312 (3731 sectors).
Track 04: 0 of 9 MB written. WARNING: padding up to secsize.
Track 04: Total bytes read/written: 10126913/10127712 (4306 sectors).
Track 05: 0 of 3 MB written. WARNING: padding up to secsize.
Track 05: Total bytes read/written: 3538363/3539760 (1505 sectors).
Track 06: 0 of 5 MB written. WARNING: padding up to secsize.
Track 06: Total bytes read/written: 5271301/5273184 (2242 sectors).
Track 07: 0 of 3 MB written. WARNING: padding up to secsize.
Track 07: Total bytes read/written: 3796451/3798480 (1615 sectors).
Track 08: 0 of 5 MB written. WARNING: padding up to secsize.
Track 08: Total bytes read/written: 6077126/6077568 (2584 sectors).
Track 09: 0 of 7 MB written. WARNING: padding up to secsize.
Track 09: Total bytes read/written: 8241865/8243760 (3505 sectors).
Track 10: 0 of 6 MB written. WARNING: padding up to secsize.
Track 10: Total bytes read/written: 6631334/6632640 (2820 sectors).
Writing time: 188.167s
/usr/bin/cdrecord: fifo had 1892 puts and 1892 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1524 times full, min fill was 92%.
No errors !!! Except the cd is ALL static. No music, no nada, sounds just like
the TV at 430 am on a sunday :<
And do i ask, does anyone know what the earlier errors represent?? And lastly,
whats causing the static and how do i get rid of it????
Thank you so much in advance,
Cherie
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
