Hi there,
I think the problem is with this line.
> /etc/lilo.conf
> append = "sr0=ide-scsi max_scsi_luns=1"
First remove this line from lilo.conf. and rerun the lilo command.
Next see which ide interface is your bus cable connected from the
Mboard to the CDRW. it is either ide1 or ide2. If it is on the ide2 interface
then type this at the LILO prompt
LILO: linux "hd?=ide-scsi"
(? is hdb or hdc or hdd)
One of these should work. After confirmation add the append line in
/etc/lilo.conf and rerun lilo command
Rizwan
On Mon, 13 Nov 2000, shwemyint wrote:
>
> Please help me sir,
>
> I hate to bother you. It may not be a bug. I looked for answer all over ldp, cnet,
>dejanews and your site for the whole week.
> Nothing help me out.
>
> Pure virgin linux, not commercial distribution for my learning purpose.
> Kernel compiled to include SCSI emulation.
>
> /var/log/dmesg:
> scsi: <fdomain> Detection failed (no card)
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> scsi : 1 host.
> Vendor: ATAPI Model: CD-R/RW CRW6206A Rev: 1.3A
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> scsi : detected 1 SCSI cdrom total.
> sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.11
>
> /etc/lilo.conf
> append = "sr0=ide-scsi max_scsi_luns=1"
>
> /var/log/messages:
> nothing pertained to scsi.
>
> /var/log/syslog:
> Nov 10 11:12:47 PeguNC kernel: ide-scsi: hdc: unsupported command in request queue
>(0)
>
> #cdrecord -scanbus # cdrecord
> Cannot open SCSI driver.
>
> #lsmod
> ide-scsi is not there.
>
> #insmod -f ide-scsi
> using /lib/modules/2.2.18/scsi/ide-scsi.o
>
> #lsmod
> ide-scsi 7400 0
>
> #cdrecord -scanbus
> Cannot open SCSI driver.
>
> Please help me what I am missing.
> I don't mind configuring kernel & lilo for the 8th. time.
>
> BRGDS.
> Myint
>
>
----------------------------------------
Content-Type: text/html; name="unnamed"
Content-Transfer-Encoding: quoted-printable
Content-Description:
----------------------------------------
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
