when the blanks come out are they very hot? i was having a simular problem
with heat. i could write a cd or two and then i would start getting
failures. this is something you might want to check out.
john
On Tue, 25 Jul 2000, KOVACS Richard wrote:
> Hi Everyone,
>
> I recieve the following error all the time, after writing some cds I
> cannot write more because of this error.
>
> Input/output error. write_g1: scsi sendcmd: retryable error
> CDB: 2A 00 00 00 10 60 00 00 10 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 04 D1 C0 00 00 0A 00 00 00 00 09 01 00 00
> Sense Key: 0x4 Hardware Error, Segment 0
> Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
> Sense flags: Blk -775946240 (not valid)
> cmd finished after 0.036s timeout 40s
>
> write track data: error after 8585216 bytes
> Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> Writing time: 26.437s
> Fixating...
> Fixating time: 64.092s
> cdrecord: fifo had 390 puts and 263 gets.
> cdrecord: fifo was 0 times empty and 244 times full, min fill was 97%.
>
> Has anyone got any suggesting? What could cause this problem?
> What exactly can a hardware error be?
>
> Thanks,
> Ritschie
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
