ok, so i tried the -pad option. still it didnt work. here is the full
error...
help?
ivan
------------------------------------------
[root@muaddib /cd-images]# cdrecord -v -dao -pad -audio 0_*.wav
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-R/RW 8X4X32 '
Revision : '5.DW'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1632256 = 1594 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 34 MB (03:26.46) no preemp
Track 02: audio 33 MB (03:17.90) no preemp
Track 03: audio 15 MB (01:30.13) no preemp
Track 04: audio 60 MB (06:01.86) no preemp
Track 05: audio 49 MB (04:54.22) no preemp
Track 06: audio 58 MB (05:44.84) no preemp
Track 07: audio 44 MB (04:23.29) no preemp
Track 08: audio 40 MB (03:58.10) no preemp
Track 09: audio 84 MB (08:22.89) no preemp
Track 10: audio 71 MB (07:07.90) no preemp
Track 11: audio 34 MB (03:27.53) no preemp
Total size: 527 MB (52:15.17) = 235138 sectors
Lout start: 527 MB (52:17/13) = 235138 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
ATIP start of lead in: -11080 (97:34/20)
ATIP start of lead out: 335100 (74:30/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 335100 Blocks current: 335100 Blocks remaining: 99962
RBlocks total: 342460 RBlocks current: 342460 RBlocks remaining: 107322
Starting to write CD/DVD at speed 8 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 34 MB written.cdrecord: Input/output error. write_g1:
scsi sendcmd: re
tryable error
CDB: 2A 00 00 00 00 F3 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 4C FF 81 FE 11 FF D1 FE EF FE 08 FF CB FE 53 FF
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x4C Qual 0x00 (logical unit failed self-configuration) Fru 0x0
Sense flags: Blk 16744958 (not valid)
write track data: error after 571536 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 7.340s
Fixating...
cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 FF 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0xFF (no seek complete) [No matching qualifier] Fru
0x0
Sense flags: Blk 0 (not valid)
Trouble flushing the cache
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable
error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
Fixating time: 52.289s
cdrecord: fifo had 73 puts and 10 gets.
cdrecord: fifo was 0 times empty and 3 times full, min fill was 93%.
[root@muaddib /cd-images]#
------------------------------------------
----- Original Message -----
From: "Jake R. Johnson" <[EMAIL PROTECTED]>
To: "Ivan Stegic" <[EMAIL PROTECTED]>
Cc: "Jake R. Johnson" <[EMAIL PROTECTED]>; "Manuel Clos"
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, December 22, 2000 4:23 PM
Subject: Re: audio problems...
: add the -pad and you will be fine
:
:
:
:
: On Fri, 22 Dec 2000, Ivan Stegic wrote:
:
: > ok, lets see... this is a problem under rh 7.0. i havent tried it on
: > anything else.
: >
: > the command string is:
: >
: > cdrecord -v speed=8 -audio 00_*.wav
: >
: > the configuration is stored in the conf files so i dont put in the
: > parameters.
: >
: > ivan
: >
: > ps. any idea how we can avoid getting spammed on this list? ggeeeez,
that
: > irritates me...
: >
: > ----- Original Message -----
: > From: "Jake R. Johnson" <[EMAIL PROTECTED]>
: > To: "Manuel Clos" <[EMAIL PROTECTED]>
: > Cc: "Ivan Stegic" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
: > Sent: Friday, December 22, 2000 12:11 AM
: > Subject: Re: audio problems...
: >
: >
: > : help us out...what is the command string you are using?
: > :
: > :
: > : On Thu, 21 Dec 2000, Manuel Clos wrote:
: > :
: > : > Ivan Stegic wrote:
: > : > >
: > : > > hi everyone...
: > : > >
: > : > > i am still having problems burning discs that are audio in my
burner.
: > can
: > : > > anyone help me please?
: > : > >
: > : > > ivan.
: > : >
: > : > Do you have the same problems with a non-Red Hat 7.0 system?
: > : >
: > : >
: > :
: >
: >
: > --
: > To UNSUBSCRIBE, email to [EMAIL PROTECTED]
: > with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
: >
:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
