I've been having an awful time burning recently. Sorry if this is covered somewhere else. I'm using mandrake 7.2: cdrecord-cdda2wav-1.9-3mdk cdrecord-1.9-3mdk 400mhz K6-III w/256mb RAM IDE0 -> HD & Burner (going to try moving burner to secondary now) CD-RW is Mitsubishi 622 I've had one successful burn and five failures since switching from redhat 6.2 to Mandrake 7.2. Under redhat I had one failure and 15+ successful burns. (wish I remembered which version of cdrecord I was using under redhat). I'm using the same 50-pk spindle of cd-r's as always. I also tried a cd-rw from a new 50-pk spindle. At first I thought I ran into a bad batch of media, which I suppose is still possible. Error given is: Track 02: 0 of 626 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 01 93 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 10 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier] Fru 0x0Sense flags: Blk 0 (not valid) write track data: error after 825344 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 21.177s Fixating... Thanks, Brian Hayward -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
