Hello,
I'm having problems making an audio cd in DAO mode with cdrecord.
It's working fine with cdrdao or cdrwin (under wine).
Could someone give me a hint ?
Thanks in advance,
Bas van den Heuvel
Platform: Dual PIII 450, Adaptec 7xxx onboard, Ricoh 6200s burner
OS: Redhat 6.2 with kernel 2.2.18
commandline :
[root@dikkepad tmp_cdrom]# cdrecord -v -dao -audio dev=0,4,0 speed=2
timeout=100 driver=mmc_cdr -pad -nopreemp *.wav
Cdrecord 1.10a16 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,4,0'
scsibus: 0 target: 4 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.4'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'RICOH '
Identifikation : 'MP6200S '
Revision : '1.00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 786432 = 768 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 71 MB (07:02.89) no preemp
Track 02: audio 33 MB (03:21.93) no preemp
Track 03: audio 69 MB (06:50.57) no preemp
Track 04: audio 52 MB (05:11.80) no preemp
Total size: 226 MB (22:27.20) = 101040 sectors
Lout start: 226 MB (22:29/15) = 101040 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11324 (97:31/01)
ATIP start of lead out: 336225 (74:45/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 336225 Blocks current: 336225 Blocks remaining: 235185
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: retryable error
CDB: 5D 00 00 00 00 00 00 00 50 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 200s
cdrecord: Cannot send CUE sheet.
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
and here's the significant output of the above command, but now with the '-V'
option:
Executing 'mode select g1' command on Bus 0 Target 4, Lun 0 timeout 200s
CDB: 55 10 00 00 00 00 00 00 44 00
cmd finished after 0.019s timeout 200s
Set Performing OPC...
Executing 'send opc' command on Bus 0 Target 4, Lun 0 timeout 200s
CDB: 54 01 00 00 00 00 00 00 00 00
cmd finished after 0.003s timeout 200s
Sending CUE sheet...
Executing 'send_cue_sheet' command on Bus 0 Target 4, Lun 0 timeout 200s
CDB: 5D 00 00 00 00 00 00 00 50 00
cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: retryable error
CDB: 5D 00 00 00 00 00 00 00 50 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 200s
cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
Executing 'send_cue_sheet' command on Bus 0 Target 4, Lun 0 timeout 200s
CDB: 5D 00 00 00 00 00 00 00 50 00
cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: retryable error
CDB: 5D 00 00 00 00 00 00 00 50 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 200s
cdrecord: Cannot send CUE sheet.
Executing 'test unit ready' command on Bus 0 Target 4, Lun 0 timeout 200s
CDB: 00 00 00 00 00 00
cmd finished after 0.001s timeout 200s
Mode Parameters (un-converted) 00 00 00 08 00 00 00 00 00 00 08 00
Mode Parameters 00 00 00 00 00 00 00 08 00 00 00 00 00 00 08 00
Executing 'mode select g1' command on Bus 0 Target 4, Lun 0 timeout 200s
CDB: 55 10 00 00 00 00 00 00 10 00
cmd finished after 0.005s timeout 200s
Executing 'prevent/allow medium removal' command on Bus 0 Target 4, Lun 0
timeout 200s
CDB: 1E 00 00 00 00 00
cmd finished after 0.002s timeout 200s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
