i hope i sent this to the right place cdrecord 1.9 and 1.10a16 cause my system to crash when burning with a yamaha crw2100s (16x10x40 scsi) the command line used: cdrecord -v -V -debug -dummy -speed 4 dev=0,5,0 -audio -pad *.wav it gets through 1 or more audio tracks, then locks up if i use versions 1.6.1 or 1.8.1 it works fine but i want to use the latest xcdroast (0.98alpha8) which REQUIRES 1.9 i also have a yamaha cdr100 which works with 1.6.1 and 1.8.1 but fails(does not lock up the system) with 1.9 and 1.10a16 i have rh6.2 with kernel update 2.2.16-3 (smp)installed dual pentium III 933 Mhz AIC-7892 Ultra 160/m SCSI host adapter the outputs of the command with the crw2100s are something like: Vendor_info : 'YAMAHA ' Identifikation : 'CRW2100S ' Revision : '1.0H' Device seems to be: Generic mmc CD-RW. .. .. Track 01: 28 of 33 MB written (fifo 100%). Executing 'write_g1' command on Bus 0 Target 5, Lun 0 timeout 40s CDB: 2A 00 00 00 30 D5 00 00 1B 00 DMA addr: 0x40201000 size: 63504 - using copy buffer pack_len: 36, reply_len: 36 pack_id: 546 result: 0 sense[0]: 00 cmd finished after 0.179s timeout t. followed by a change log?! the outputs of the command with the cdr100 are: .. Vendor_info : 'YAMAHA ' Identifikation : 'CDR100 ' Revision : '1.12' Device seems to be: Yamaha CDR-100. Using driver for Yamaha CDR-100 / CDR-102 (yamaha_cdr100). .. .. cdrecord: Input/output error. philips write_track: scsi sendcmd: retryable error CDB: E6 00 00 00 00 00 04 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 A3 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0xA3 Qual 0x00 (illegal medium) Fru 0x0 Sense flags: Blk 0 (not valid) then tries to fixate and quit thank you for your time and effort, dan howell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
