I'm pulling my hair out here, can't get cdrecording to work. here is
all the info i can think of, hope someone can help
[m0loch@cartman m0loch]$ uname -r
2.4.2-7mdk
[root@cartman /root]# cdrecord -scanbus
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C)1995-2000 Jörg
Schilling
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'MITSUMI ' 'CR-4802TE ' '1.9D'
Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
from /var/log/messages
Mar 9 15:15:35 cartman kernel: SCSI subsystem driver Revision: 1.00
Mar 9 15:15:35 cartman kernel: scsi0 : SCSI host adapter emulation for
IDE ATAPI devices
Mar 9 15:15:35 cartman kernel: Vendor: MITSUMI Model:
CR-4802TE Rev: 1.9D Mar 9 15:15:35 cartman kernel: Type:
CD-ROM ANSI SCSI revision: 02
the process and resulting error
[root@cartman /root]# cdrecord dev=0,0,0 -dummy blank=fast
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MITSUMI '
Identifikation : 'CR-4802TE '
Revision : '1.9D'
Device seems to be: Philips CDD-522.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Starting to write CD/DVD at speed 1 in dummy mode for single session.
Starting to write CD/DVD at speed 1 in dummy mode for single session.
Last chance to quit, starting dummy write in 1 seconds.
cdrecord: Input/output error. prevent/allow medium removal: scsi
sendcmd: retryable error
CDB: 1E 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
the lilo.conf line
image=/boot/vmlinuz
label=linux
root=/dev/hdb5
append="hdc=ide-scsi"
read-only
have also used kernel 2.2.17 with same results
also updated cdrw firmware to 2.1 with same results
have recompiled cdrecord under the current kernel
I've done everything that i could find or think of
HELP PLEASE
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
