>From: Jan Tops <[EMAIL PROTECTED]>
>Hello,
>I have a LG CD-RW CED-8080B CD writer on a Redhat 6.2 with 2.2.18 kernel
>(using ide-scsi module).
>When I use Cdrecord 1.10a17 with the following commandline:
>./cdrecord dev=0,0,0 -v -audio /tmp/tmp.cdr
>the following error occurs (a full dump is included as attachment):
>Track 01: 0 of 37 MB written../cdrecord: Input/output error.
>write_g1: scsi sendcmd: no error
>CDB: 2A 00 00 00 00 00 00 00 1B 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
>Sense flags: Blk 0 (not valid)
>cmd finished after 0.001s timeout 40s
>And cdrecord aborts without writing something to the cd.
>However when I use
>./cdrecord dev=0,0,0 -v -dao -audio /tmp/tmp.cdr
>everything works fine except for the following warning:
You have bad firmware..... I never had any problems with the drive.
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
