I'm attempting to write to a writable disk on a Philips CDRW800
reader/writer, but none of the three kinds of writable disks I
have will work. I have no problems ripping disks, just with
writing them.
The processor is a Celeron 466 MHz.
The Linux version is Mandrake 7.2.
The kernel version is 2.2.17-21mdk.
The command I'm using is:
cdrecord dev=0,0,0 fs=4096k -v -useinfo speed=4 -dao -eject -pad \
-audio "/tmp/track-01.wav" >& cdrecord.log
The messages and error I receive from this command are:
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.39
Track1 Start: '32' (32)
pregap1: 182
Cdrecord 1.10a19 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PHILIPS '
Identifikation : 'PCRW804 '
Revision : ' 2,1'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1572864 = 1536 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 63 MB (06:18.53) no preemp pregapsize: 182
Total size: 63 MB (06:18.96) = 28422 sectors
Lout start: 64 MB (06:20/72) = 28422 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11324 (97:31/01)
ATIP start of lead out: 336225 (74:45/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 336225 Blocks current: 336225 Blocks remaining: 307803
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 9 seconds.^H^H^H^H^H^H^H^H^H^H8
seconds.^H^H^H^H^H^H^H^H^H^H7 seconds.^H^H^H
Waiting for reader process to fill input buffer ... /usr/bin/cdrecord: Input/output
error. mode select g1: scsi sendcmd:
CDB: 55 10 00 00 00 00 00 00 3C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 13 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
/usr/bin/cdrecord: Warning: using default CD write parameter data.
Mode Select Data 00 11 00 00 05 32 02 00 00 00 00 00 00 00 00 00 00 00 00 96 00 00 00
00 00 00 00 00 00 00 00 00 00 00 0
/usr/bin/cdrecord: Cannot open new session.
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
input buffer ready.
Thank you,
Steven Baum
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
