I tried also:
root> cooks2: {1004} cdrecord -blank=all speed=2 -force dev=0,6,0
Cdrecord 1.11a01 (i386-unknown-freebsd4.2) Copyright (C) 1995-2001 J�rg
Schilling
scsidev: '0,6,0'
scsibus: 0 target: 6 lun: 0
Using libscg version 'schily-0.5'
Device type : Removable CD-ROM
Version : 4
Response Format: 2
Capabilities : SYNC
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 9200 '
Revision : '1.0c'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
cdrecord: Input/output error. read disk info: scsi sendcmd: retryable
error
CDB: 51 00 00 00 00 00 00 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 12 00 00 00 00 04 01 00 00 00 00 00 00
00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 4
cmd finished after 0.009s timeout 240s
cdrecord: Cannot get disk type.
cdrecord: Warning: using default CD write parameter data.
Mode Select Data 00 70 00 08 00 00 00 00 00 00 08 00 05 32 01 E4 08 00 00
00 00 00 00 00 00 20 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cdrecord: Input/output error. set cd speed: scsi sendcmd: retryable error
CDB: BB 00 FF FF 01 62 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 12 00 00 00 00 04 01 00 00 00 00 00 00
00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.009s timeout 40s
cdrecord: Cannot set speed/dummy.
Thanks,
Edilson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
