Hello:
I have installed the cdrtools-1.11a02 and continue to fail to be able to
write Track at Once:
PLESAE NOTE:
THAT DISK AT ONCE, FOR AUDIO AND DATA, DOES WORK!
========================================================
Test of new cdrecord (version 1.11a02) on SuSE 6.4 (kernel 2.2.14)
and LG CD-RW 8042B using ide-scsi
I am too much a newbee to know how to read the results
of scgcheck ( log shown at bottom of this too long message)
Thanks in advance for any information.
John Turner
--------------- log of test ----------
wsogmm2:~ # /opt/schily/bin/cdrecord dev=0,0,0 -v -useinfo speed=4
-dummy -eject -pad -audio "/tmp/cdimage/track-01.wav"
pregap1: -1
Cdrecord 1.11a02 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg
Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.36
Using libscg version 'schily-0.5'
atapi: 1
/opt/schily/bin/cdrecord: Warning: controller returns wrong size for CD
capabilities page.
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8042B '
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
/opt/schily/bin/cdrecord: Warning: controller returns wrong size for CD
capabilities page.
/opt/schily/bin/cdrecord: Warning: controller returns wrong size for CD
capabilities page.
/opt/schily/bin/cdrecord: Warning: controller returns wrong size for CD
capabilities page.
/opt/schily/bin/cdrecord: Warning: controller returns wrong size for CD
write parameter page.
Checking possible write modes: TAO PACKET SAO SAO/R16 SAO/R96P SAO/R96R
RAW/R16 RAW/R96P RAW/R96R
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R16 SAO/R96P SAO/R96R RAW/R16
RAW/R96P RAW/R96R
Drive buf size : 1024000 = 1000 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 14 MB (01:24.73) no preemp
Total size: 14 MB (01:24.73) = 6355 sectors
Lout start: 14 MB (01:26/55) = 6355 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
ATIP start of lead in: -11559 (97:27/66)
ATIP start of lead out: 333750 (74:12/00)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 21
Manufacturer: Ricoh Company Limited
/opt/schily/bin/cdrecord: Warning: controller returns wrong size for CD
write parameter page.
Blocks total: 333750 Blocks current: 333750 Blocks remaining: 327395
RBlocks total: 352726 RBlocks current: 352726 RBlocks remaining: 346371
/opt/schily/bin/cdrecord: Warning: controller returns wrong size for CD
write parameter page.
/opt/schily/bin/cdrecord: Warning: controller returns wrong size for CD
capabilities page.
Starting to write CD/DVD at speed 4 in dummy mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation
starts.
Waiting for reader process to fill input buffer ... input buffer ready.
/opt/schily/bin/cdrecord: Warning: controller returns wrong size for CD
write parameter page.
/opt/schily/bin/cdrecord: Warning: controller returns wrong size for CD
write parameter page.
Starting new track at sector: 0
Track 01: 0 of 14 MB written./opt/schily/bin/cdrecord: Input/output
error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 40s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 5.030s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.001s
/opt/schily/bin/cdrecord: fifo had 64 puts and 1 gets.
/opt/schily/bin/cdrecord: fifo was 0 times empty and 0 times full, min
fill was 100%.
========================================== end of log ==============
Results of : scgcheck
wsogmm2:~ # /opt/schily/bin/scgcheck
Scgcheck 1.10 (i686-pc-linux-gnu) SCSI user level transport library ABI checker.
Copyright (C) 1998,2001 J�rg Schilling
Checking if your implementation supports to scan the SCSI bus.
Trying to open device: '(NULL POINTER)'.
Using libscg version 'schily-0.5'
Max DMA buffer size: 32768
scsibus0:
/opt/schily/bin/scgcheck: Warning: controller returns wrong size for CD capabilities
page.
0,0,0 0) 'LG ' 'CD-RW CED-8042B ' '1.05' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
/opt/schily/bin/scgcheck: Warning: controller returns wrong size for CD capabilities
page.
----------> SCSI scan bus test PASSED
For the next test we need to open a single SCSI device.
Best results will be obtained if you specify a modern CD-ROM drive.
Enter SCSI device name [0,6,0]: 0,0,0
Trying to open device: '0,0,0'.
Using libscg version 'schily-0.5'
Max DMA buffer size: 8388608
/opt/schily/bin/scgcheck: Warning: controller returns wrong size for CD capabilities
page.
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8042B '
Revision : '1.05'
Ready to start test for succeeded command? Enter <CR> to conitnue:
Executing 'inquiry' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB: 12 00 00 00 24 00
cmd finished after 0.000s timeout 40s
Inquiry Data : 05 80 00 21 1F 00 00 00 4C 47 20 20 20 20 20 20 43 44 2D 52 57 20 43
45 44 2D 38 30 34 32 42 20 31 2E 30 35
----------> SCSI succeeded command test PASSED
Ready to start test for failing command? Enter <CR> to conitnue:
Inquiry did not fail.
This may be because the firmware in your drive is buggy.
If the current drive is not a CD-ROM drive please restart
the test utility. Otherwise remove any medium from the drive.
Ready to start test for failing command? Enter <CR> to conitnue:
/opt/schily/bin/scgcheck: Input/output error. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
----------> SCSI failed command test PASSED
Ready to start test for sense data count? Enter <CR> to continue:
Testing if at least CCS_SENSE_LEN (18) is supported...
Sense Data: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00
18 16 13
Sense Data: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 FF FF
18 16 16
----------> Minimum standard (CCS) sense length failed
----------> Wanted 18 sense bytes got (16)
Testing for 32 bytes of sense data...
Sense Data: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
32 16 13
Sense Data: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF
32 16 16
----------> Wanted 32 sense bytes got (16)
----------> Got a maximum of 16 sense bytes
----------> SCSI sense count test FAILED
----------> SCSI status byte test NOT YET READY
Ready to start test for working DMA residual count? Enter <CR> to conitnue:
**********> Testing for working DMA residual count == 0.
cnt: 36 got: 36 residual cnt: 36
cnt: 36 got: 36 residual cnt: 36
----------> Wanted 36 bytes got it.
----------> SCSI DMA residual count == 0 test PASSED
Ready to start test for working DMA residual count == DMA count? Enter <CR> to
conitnue:
cnt: 0 got: 36 residual cnt: 36
cnt: 0 got: 36 residual cnt: 36
----------> Wanted 0 bytes got (36)
----------> SCSI DMA residual count == DMA count test FAILED
Ready to start test for working DMA residual count == 1? Enter <CR> to conitnue:
cnt: 36 got: 37 residual cnt: 37
cnt: 36 got: 37 residual cnt: 37
----------> Wanted 36 bytes got (37)
----------> SCSI DMA residual count == 1 test FAILED
**********> Testing for working DMA overrun test.
cnt: 36 got: 35 residual cnt: 35
cnt: 36 got: 35 residual cnt: 35
----------> SCSI DMA overrun test FAILED
----------> SCSI transport code test NOT YET READY
======================= end of log ==================
John L Turner
2425 Poca River Road South
Poca, WV 25159-9027 voice 304 776-3675
Point of sale Inventory Control (PSIC)
http://members.intelos.net/~jlt
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
