>From: David Kelly <[EMAIL PROTECTED]>
>Tried to find an archive of this list before posting, but failed.
>Haven't found the subscribe information either, only its address on
>Jorg's cdrtools site. So please include me in your replies.
>Am having problems with cdrecord and cdrdao (using schily-0.5)
>under a fresh update of FreeBSD 4.4. Naturally everything worked
>perfectly The Last Time I Tried It, months ago.
>Don't understand the error message. Is it saying my CD-R is write
>protected? LED never flashes on the front of the CD-RW drive when the
>commands below execute. Flashes only the moments after closing the tray.
>cdrdao is less verbose but also fails to work.
>Don't have any problems reading from the drive.
>This is uname -a:
>FreeBSD grumpy.dyndns.org 4.4-STABLE FreeBSD 4.4-STABLE #0: Mon Sep 24 11:53:16 CDT
>2001 [EMAIL PROTECTED]:/usr4/obj/usr/src/sys/GRUMPY i386
>grumpy: [1015] cdrecord -v speed=4 dev=0,6,0 -data 4.2-install.iso
>Cdrecord 1.10 (i386-unknown-freebsd4.4) Copyright (C) 1995-2001 J�rg Schilling
>TOC Type: 1 = CD-ROM
>scsidev: '0,6,0'
>scsibus: 0 target: 6 lun: 0
>Using libscg version 'schily-0.5'
>atapi: 0
>Device type : Removable CD-ROM
>Version : 4
>Response Format: 2
>Capabilities : SYNC
>Vendor_info : 'HP '
>Identifikation : 'CD-Writer+ 9200 '
>Revision : '1.0e'
>Device seems to be: Generic mmc CD-RW.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags : SWABAUDIO
>Drive buf size : 4183808 = 4085 KB
>FIFO size : 4194304 = 4096 KB
>Track 01: data 637 MB
>Total size: 731 MB (72:29.69) = 326227 sectors
>Lout start: 732 MB (72:31/52) = 326227 sectors
>Current Secsize: 2048
>ATIP info from disk:
> Indicated writing power: 3
> Reference speed: 6
> Is not unrestricted
> Is erasable
> Disk sub type: High speed Rewritable (CAV) media (1)
> ATIP start of lead in: -11625 (97:27/00)
> ATIP start of lead out: 333750 (74:12/00)
> speed low: 4 speed high: 8
> power mult factor: 1 5
> recommended erase/write power: 5
> A2 values: 26 B2 4A
>Disk type: Phase change
>Manuf. index: 0
>Manufacturer: Illegal Manufacturer code
>Blocks total: 333750 Blocks current: 333750 Blocks remaining: 7523
>RBlocks total: 336246 RBlocks current: 336246 RBlocks remaining: 10019
>Starting to write CD/DVD at speed 4 in write mode for single session.
>Last chance to quit, starting real write in 0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... input buffer ready.
>Performing OPC...
>Starting new track at sector: 0
>Track 01: 0 of 637 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd:
>retryable error
>CDB: 2A 00 00 00 00 00 00 00 1F 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 27 00 00 00 00 00 00 00 00 00 00 00
>00 00
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0
>Sense flags: Blk 0 (not valid)
>resid: 63488
>cmd finished after 0.013s timeout 40s
If you buy a high speed media, you need a high speed writer.
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
