Joerg Schilling schrieb: > >From: Marek Schneider <[EMAIL PROTECTED]> > > >I am runnig RedHat Linux 7.0 (Pentium III 500MHz), cdrecord 1.9 and > >using the Plextor PX-R412C Writer (SCSI). > >I have already destroyed over 30 CD-Rs trying to burn some free CD > >Images (like Solaris, Debian Linux etc) > >during different tests (divers CD-Rs like Intenso, Philips, Memorex, > >Emtec, different recording speed rates, > >different Buffer sizes and Hardware SetUps (with or w/o parity)). > > > >[root@linux real]# cdrecord -v speed=2 dev=6,0 -data cd.raw > >[root@linux real]# readcd dev=5,0 f=cd.raw > > Things happen this way when you don't read the documention! > > Everything is OK, read README.copy & README.verify
well .. thank you for the advice ! I have checked README.copy & README.verify ... however I am still confused and NOT successfull :( I have tested as follows (wiht an original pressed Data CD): [root@linux real]# readcd -v dev=5,0 f=cd2.raw [root@linux real]# readcd -v dev=6,0 -w f=cd2.raw [root@linux real]# readcd dev=6,0 f=cd2.raw.new It was NOT possible to read in the whole selfmade CD without errors :( So I have started a new try as follows: [root@linux SuSE]# cdrecord -v dev=6,0 -isosize cd2.raw [root@linux SuSE]# readcd dev=6,0 f=cd2.raw.new It was again NOT possible to read in the whole selfmade CD without errors :( --- ]readcd: Input/output error. Cannot read source disk ]readcd: Retrying from sector 329472. ]...................................................................................~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~ ]readcd: Input/output error. Error on sector 329554 not corrected. Total of 1 errors. --- The new CD image is a bit smaller compare to the original one: --- ]-rw-rw-r-- 1 root root 675237888 Okt 11 23:49 cd2.raw ]-rw-rw-r-- 1 root root 674758656 Okt 12 01:12 cd2.raw.new --- In BOTH cases it was not possible to read the content of the new CDs. I have not used the -dao and/or the -pad and/or the -data option. YES ... I have ALSO read the cdrecord and readcd manual ... WHAT would the appropriate command for burning of ISO CD images (like Solaris8 or Debian Linux)? (the CD ISO image exists already as a file) HOW important is the -pad option for data CDs? (ISO CD images)? Am I wrong if I am waiting exactly the same CD image of the new CD copy? (with readcd ...) Thank you again for some further suggestions. -- regards, Marek Schneider --------------------------- Version: GnuPG v1.0.6 (GNU/Linux) Comment: public key - pgp.mit.edu Key fingerprint = 887B DA53 A148 7FB0 A237 10FD 6C82 961D 2DF3 F33B
[root@linux SuSE]# readcd dev=6,0 f=cd2.raw.new Capacity: -150 Blocks = -300 kBytes = 0 MBytes = 0 prMB Sectorsize: 2048 Bytes Capacity: -150 Blocks = -300 kBytes = 0 MBytes = 0 prMB Sectorsize: 2048 Bytes Copy from SCSI (0,6,0) disk to file 'cd2.raw.new' end: 10000000 readcd: Input/output error. read_g1: scsi sendcmd: retryable error CDB: 28 00 00 05 07 80 00 00 80 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 05 07 EA 0A 00 00 00 00 06 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x06 Qual 0x00 (no reference position found) Fru 0x0 Sense flags: Blk 329706 (valid) cmd finished after 0.827s timeout 40s readcd: Input/output error. Cannot read source disk readcd: Retrying from sector 329600. ...........................................................................................................~~~-~~~+~~~ --- [root@linux SuSE]# cdrecord -v dev=6,0 -isosize cd2.raw Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling TOC Type: 1 = CD-ROM scsidev: '6,0' scsibus: 0 target: 6 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.1' atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC LINKED Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-R412C ' Revision : '1.07' Device seems to be: Generic mmc CD-R. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1168944 = 1141 KB FIFO size : 4194304 = 4096 KB Track 01: data 643 MB Total size: 739 MB (73:14.08) = 329556 sectors Lout start: 739 MB (73:16/06) = 329556 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 6 Is unrestricted Is not erasable ATIP start of lead in: -11231 (97:32/19) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 27 Manufacturer: Prodisc Technology Inc. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 30293 Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 1 seconds. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 643 of 643 MB written (fifo 100%). Track 01: Total bytes read/written: 674926592/674926592 (329554 sectors). Writing time: 1111.009s Fixating... Fixating time: 64.569s cdrecord: fifo had 10631 puts and 10631 gets. cdrecord: fifo was 0 times empty and 10565 times full, min fill was 96%. --- [root@linux SuSE]# readcd dev=6,0 f=cd2.raw.new Capacity: 329556 Blocks = 659112 kBytes = 643 MBytes = 674 prMB Sectorsize: 2048 Bytes Capacity: 329556 Blocks = 659112 kBytes = 643 MBytes = 674 prMB Sectorsize: 2048 Bytes Copy from SCSI (0,6,0) disk to file 'cd2.raw.new' end: 329556 readcd: Input/output error. read_g1: scsi sendcmd: retryable error CDB: 28 00 00 05 07 00 00 00 54 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 05 07 52 0A 00 00 00 00 06 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x06 Qual 0x00 (no reference position found) Fru 0x0 Sense flags: Blk 329554 (valid) cmd finished after 0.188s timeout 40s readcd: Input/output error. Cannot read source disk readcd: Retrying from sector 329472. ...................................................................................~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~ readcd: Input/output error. Error on sector 329554 not corrected. Total of 1 errors. Time total: 552.461sec Read 658944.00 kB at 1192.7 kB/sec. ---
