Hi...
Interesting, by no means am I able to give you an absolute answer to your
problem. I have only casually looked at the source code with respect to some
changes to fix gap problems mentioned in a bug report on sourceforge.net.
Can you try something for me. Edit the cue file and delete the first track and
check if this doesn't solve your problems. If it does, go on and try to swap
the first and second track entry in the cue sheet.
I haven't finished trying different scenarios, but I have found my setup
(RedHat 7.1 or 7.2, LG CD-RW CED-8083B Firmware Rev 1.05 or 1.06 and cdrdao
1.1.5) doesn't work on about 2 out of 10 audio CD so far. Cdrdao keeps dying at
the same location on a given problem disk even if simulating a write.
Interestingly enough, if I swap the problem track with the one before it, I can
get all the track on the disk, out of order of course :-(.
[EMAIL PROTECTED]
Will Heyman wrote:
> I am trying to burn audio CD-R with a RICOH CD-R/RW RW7040A
> It looks like it burns fine til 16/604 Mg
>
> The results are listed below.
>
> I'm running cdrecord 1.10 on RH7.2
>
> Does anyone know what I'm doing wrong?
>
> Thanks,
>
> Will
> [EMAIL PROTECTED]
>
> # cdrecord -dummy -v dev=0,0,0 -audio taf.cdr
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling
> TOC Type: 0 = CD-DA
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'RICOH '
> Identifikation : 'CD-R/RW RW7040A '
> Revision : '1.1k'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 1561728 = 1525 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: audio 605 MB (60:00.34) no preemp swab
> Total size: 605 MB (60:00.34) = 270026 sectors
> Lout start: 606 MB (60:02/26) = 270026 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 4
> Is unrestricted
> Is not erasable
> Disk sub type: Medium Type A, high Beta category (A+) (3)
> ATIP start of lead in: 232166 (151:36/116)
> ATIP start of lead out: 551141 (121:89/116)
> Disk type: unknown
> Manuf. index: -1
> Manufacturer: unknown (not in table)
> Blocks total: 359849 Blocks current: 343230 Blocks remaining: 73204
> Starting to write CD/DVD at speed 4 in dummy mode for single session.
> Last chance to quit, starting dummy write in 0 seconds. Operation
> starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Starting new track at sector: 16619
> Track 01: 16 of 605 MB written (fifo 22%).cdrecord: Input/output
> error. write_g1: scsi sendcmd: no error
> CDB: 2A 00 00 00 5C E6 00 00 0D 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: F0 00 05 00 00 5C E6 0C 00 00 00 00 10 02 00 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier]
> Fru 0x0Sense flags: Blk 23782 (valid)
> cmd finished after 0.682s timeout 40s
>
> write track data: error after 16847376 bytes
> Sense Bytes: 70 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00
> Writing time: 33.354s
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time: 0.011s
> cdrecord: fifo had 679 puts and 552 gets.
> cdrecord: fifo was 10 times empty and 2 times full, min fill was 0%.
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
