On Thu, 7 Mar 2002, Joerg Schilling wrote: > >From: Nate Bargmann <[EMAIL PROTECTED]> > > > >During the past week I've updated to a new system that features an > >Athlon 1.33G processor and the VIA chipset. I did a direct copy of my > >Linux partitions from the HD of the old machine to the HD of this > >machine. On the old machine I had no problems writing CDs at 12X with > >my Sony CRX160E using either xcdroast or the command line. > > >In this machine 12X fails every time. More testing revealed that 4X > >works every time. 8X is unreliable. During the one time 8X worked, I > >received the following message about 25% through the disk (a 16 track > >audio CD of about 72 minutes): > > >Probable hardware bug: clock time configuration lost - probably a VIA 686a > >Probable hardware bug: restoring chip configuration
> A buffer underrun! > > Read README.ATAPI. > > If this does not help, ask the Linux kernel folks. I shudder to think that you really "did a direct copy" from one machine and are running the same kernel on a new machine with a different architecture. Try building a 2.4.17 or 2.4.19-pre2-ac2 kernel for this and see if the problem goes away. When you go to a bright shiney new machine, with a very recent chipset, going to a very recent kernel is highly recommended. I don't promise that this is fixed, but at least a kernel which fits your hardware will give you a fighting chance. I bet you're still running your old config files as well, doing whatever hardware setup was a good idea for the old machine... -- -bill davidsen ([EMAIL PROTECTED]) "The secret to procrastination is to put things off until the last possible moment - but no longer" -me -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
