Could somebody offer a possible explanation? Hardware: Netra w/ Sun UltraSPARC-IIi" 440, 512M, large raid array...
Yes I am running this as root. Yes I can burn a blank. Here is what I am seeing: # cdrecord -v -dev=3,0 speed=12 -pad -audio *.wav Cdrecord release 1.6.1 Copyright (C) 1995-1998 J�rg Schilling TOC Type: 0 = CD-DA scsidev: '3,0' scsibus: 0 target: 3 lun: 0 atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC LINKED Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-W1210S' Revision : '1.03' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Track 01: audio 35 MB (03:28.06) no preemp pad Track 02: audio 38 MB (03:51.62) no preemp pad Track 03: audio 33 MB (03:21.95) no preemp pad Track 04: audio 29 MB (02:57.89) no preemp pad Track 05: audio 42 MB (04:09.75) no preemp pad Track 06: audio 138 MB (13:40.32) no preemp pad Track 07: audio 33 MB (03:20.96) no preemp Track 08: audio 47 MB (04:44.42) no preemp pad Track 09: audio 32 MB (03:15.03) no preemp pad Total size: 435 MB (43:06.09) = 193957 sectors Lout start: 435 MB (43:08/07) = 193957 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 6 Is not unrestricted Is not erasable Disk sub type: 4 ATIP start of lead in: -12414 (97:16/36) ATIP start of lead out: 359849 (79:59/74) Disk type unknown Manufacturer unknown (not in table) Blocks total: 359849 Blocks current: 359849 Blocks remaining: 165892 Starting to write CD/DVD at speed 12 in write mode for single session. Last chance to quit, starting real write in 1 seconds. Waiting for reader process to fill input-buffer ... input-buffer ready. Starting new track at sector: 0 cdrecord: I/O error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 04 38 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 47 00 00 00 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x47 Qual 0x00 (scsi parity error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.024s timeout 40s write track data: error after 2540160 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 cdrecord: I/O error. flush cache: scsi sendcmd: no error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 80 00 00 00 0A 00 00 00 00 0C 08 00 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x08 (write error - recovery failed) Fru 0x0 Sense flags: Blk -2147483648 (valid) cmd finished after 0.067s timeout 120s Trouble flushing the cache Writing time: 11.088s Fixating... cdrecord: I/O error. close track/session: scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 09 00 00 00 00 0A 00 00 00 00 80 07 00 00 00 00 Sense Key: 0x9 Vendor Unique, Segment 0 Sense Code: 0x80 Qual 0x07 (limited laser life) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 480s Fixating time: 0.003s cdrecord: fifo had 105 puts and 41 gets. cdrecord: fifo was 0 times empty and 20 times full, min fill was 95%. Thanks :) doug [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
