Hi folks,
I have problem with writing audio-cd. I used to have KDE2.2 and X-CD-Roast
and there was no problem. Every time I tried to burn some audio-cd under
Gnome, it ended with error. Now I have KDE3 and again I'm not able to
write audio-cd. But when I set writing speed to 10, it works. My CD-RW
writer is Teac CD-W516EB with maximum 16x speed. I don't know what can be
bad. Even under KDE2.2 it slowed down whole system, but now I works in no
way.

cdrecord ends like this:

Last chance to quit, starting dummy write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:   7 of  29 MB written (fifo 100%).cdrecord: Input/output error.
write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 0D 2F 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.027s timeout 200s

write track data: error after 7938000 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing  time:   46.870s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    3.033s
cdrecord: fifo had 189 puts and 126 gets.
cdrecord: fifo was 0 times empty and 44 times full, min fill was 93%.

Thanks

-- 
 Tomáš POTRUSIL
                                email: [EMAIL PROTECTED]
                                mobil:  0776/598367


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to